Skip to main content Skip to page footer

NEW: Catmar Range Explorer 64

The new “custom-made” all-aluminium sailing catamaran Catmar® Range Explorer 64 is the perfect long-distance cruising yacht for a couple, a family or a group for worldwide blue water cruises to the most remote corners of the world.

Its timeless design conveys elegance and power at the same time and contributes to a very comfortable and safe sailing experience. The result is a homogeneous, torsion-resistant rigid and extremely stable structure preventing creaking noises at sea.

With its upwind One Sails Hydranet sail area of 240 sqm (main 145sqm, genoa 95 sqm), it offers a high sailing potential for fast and save cruises.

An impressive living area of around 245 sqm on three decks, a headroom of 2.15 metres throughout the yacht and particularly large storage spaces have been created for living on board for months or years.

The wide, covered aft cockpit, the forward cockpit and the large flybridge offer spacious outdoor living areas in all weather conditions.

The new Catamar® Range Explorer 64 has also been developed for the use of sustainable, high-quality building materials and components and is prepared for an optional hybrid drive configuration.

Catamaris® is committed to environmental protection and sustainability. Most of the components used can be recycled and reused in an environmentally friendly way.

<button class="btn btn-default">More about sustainability</button>

CUSTOM DESIGN ACCORDING TO YOUR PERSONAL REQUIREMENTS

A particular strength of Catamaris is that the Catmar Range Explorer catamarans are not built in series. Catamaris® starts where most (series) shipyards stop.

This means that the design of the Catmar® Range Explorer 64 shown here can be completely customised to your preferences or as a completely new catamaran design.

In close co-operation with you and our design office, the shipyard and the Catamaris® team, your personal objectives, e.g. with regard to the equipment, the propulsion system, the sail wardrobe, the interior layout and styling, etc., are defined.

The layout, design, choice of materials, fabrics, colours, finishes and all options make the new catamaran your very own personal masterpiece.

EXTERIOR

The following description is to be understood as a guideline. Thanks to our ‘custom’ construction method, this can be adapted to your personal ideas.

The hulls and keels, the deck and the superstructure are made of class-certified 5083 H 321/H111 aluminium. The hulls are equipped with aluminium bulkheads and reinforced bow tips. More about the advantages of aluminium.

Efficient, widely spaced engines and optimised propellers ensure excellent manoeuvrability of the catamaran even in the tightest of spaces, e.g. in marinas. An optional bow thruster could be considered.

The engine compartments, which are separated by watertight and soundproof bulkheads, house the generator, diving compressor, watermaker and other technical equipment and are easily accessible for maintenance by large telescopic deck hatches.

<button class="btn btn-default">See detailed exterior</button>

INTERIOR

The following description is to be understood as a guideline. Thanks to our ‘custom’ construction method, this can be adapted to your personal ideas.

REAR- AND FORECOCKPIT

The aft cockpit comes with removable, transparent panels for wind and rain protection and has a comfortable seating area for up to 8 people with a large table, a sun lounger and a bench seat at the back.

Next to it on the port side is the space for scuba tanks and an outdoor kitchen with fridge, grill, sink and a worktop.

On the starboard side storage space and space for the life raft. Behind the fixed platform with hoisting a crane for the dinghy. Optionally a hydraulic platform can be delivered. From aft cockpit, the stairs give access to the fly bridge.

The quiet space in the forward cockpit with a bench seat is accessible from the saloon via a watertight door.

The construction of your new catamaran

Under the constant supervision of Catamaris®, your CATMAR® RANGE EXPLORER 64 catamaran will be built by our partner Dijkstra Jachtbouw B.V. in Harlingen - Netherlands, which has many years of experience in the construction of multihulls. Dijkstra is certified by Germanischer Lloyd and Bureau Veritas and has already built more than 180 aluminium catamarans, yachts and commercial vessels.

Preliminary Technical Specifications

Length o.a. 64.8ft - 19.75m
Length waterline 62.7ft - 19.13m
Beam 31.0ft- 9.45m
Draft 5.74ft - 1.75m
Bridgedeck clearance 2.95ft.- 0.90m
Head clearance in both decks 7.05ft - 2.15m
Building material Certified aluminium 5083 H 321/H111
Cabins 1 Master, 3-4 guest cabins
Total sail area slatted main and genoa Hydranet 240m² Hydranet
Engines 2 x 160Ps/Hp
Optionally “Green ECO Power” Hybrid propulsion
Fuel 2 x 265gal - 2 x 1.000 l
Water 2 x 198 gal - 2 x 1.000 l
Black water 2 x 53 gal - 2 x 200 l
Naval Architect KROES Marine Projects B.V. - NL

Side views of the CATMAR RANGE EXPLORER 64

Click on photo to enlarge

Click on photo to enlarge

Layouts of the CATMAR RANGE EXPLORER 64

Click on photo to enlarge

Click on photo to enlarge

Request information

Please let us know your requirements so that we can provide you with the specific information you would like to receive.

Send now